Quality is never more important: all aims for zero defects in spinning in the field of yarn manufacturing, the Draw Frame Top Rollers are playing major role where the technician look for excellent quality Roller assembly which resists bending & breaking - has high wear resistance - has precise geometry - is long lasting.

Recognizing these fundamental requirements, the Shell is made out of Alloy Steel which consists of high Chrome and medium Carbon. The End Bush is made out of Alloy steel with medium Carbon. Heat treatment process is adopted on the Shell and End Bush for having high wear resistance at frictional area (where bearing comes in contact) of the Shell and clamping/seating portion of the End Bush. By maintaining precise geometry on the Shell and End Bush, the fitment of the Roller assembly on the machine is perfect. By using qualitative inputs like reputed make Bearings, Rubber Sealings and reputed amke Cots, the reliability and durability of the Rollers are at optimum level.

Discover the ultimate Top Roller-KESHAV!!
Otherwise, Uster U% increase as imperfection added due to inferior quality of raw materials, heat treatment and geometry.

Similar manufacturing methods have been adopted on our comber Detaching Rollers, Comber Draw Box Rollers and Lap Former rollers to achieve best results in out-put with consistency.

YOUR MOST MODERN IMPORTED DRAW FRAMES & COMBERS NEEDS CRITICAL PARTS.

Having vast experience in Engineering field, our Engineers are quite capable in producing critical spare parts with perfect geometry and with suitable material on the basis of its application. Many critical components have been manufactured by us for E5/3 unilap, Cherry Hara - Usc 600, E7/6 Comber etc.

OUR INNOVATIVE TAPER ADAPTER SAVES "K" SERIES BEARINGS LIFE TO OPTIMUM LEVEL
It is an innovative item which comes for Self aligned Ball/Roller Bearings with taper bore. It suits to the Bearings like 1205K, 1209K, 1309K, 22209K, 22208K, 22211K etc. Adapters are available for all ranges of Bearings. Our Taper Adapters are playing a key role in maintaining the life of the Bearing to its maximum extent and avoiding the damages in Bearing Housing (Bearing Pedestal).

It consists of Sleeve, Lock-Nut and Lock-Washer having the following salient features:

• Sleeve made out of medium Carbon Steel. 

• Average surface finish given to have a good clamping effect. 

• Perfect taper ratio maintained to ensure the distribution of load on Beating is uniform. 

• Easy assembly system adopted without tampering the Lock Nut by using odd type of tools. 

• Load factor on the Bearing can be confirmed by pulling the Sleeve uniformly with the help of Soc.Hd.Screw. 

• Firm locking provision given on Lock-Nut by bending the outer tab of Lock-Washer. 

• While assembly taper sleeve, the Bearing will not have any disturbance from its location point.

^TOP